Im all registered. Just gotta get the car ready for a big trip now.

Woot

copied from outside CPC Complete document here. docs.google.com/document/d/1l9M4E8MxZxQkN05LXT4ZOaouVwildbqTEV-t--lXyOg/edit?usp=sharing ook so for anyone who knows what it is youll probly like this. for anyone who doesnt know you will probly love this. Ok so got my navi in yesterday. so of course h...

Copied from outside CPC Once upon a time i had done a complete writeup in PDF with pictures a complete breakdown of wiring. however over the years the file hosting site deleted it and I don't have the original file anymore. if I find the time i will add a new writeup. complete document here. docs.go...

copied from outside CPC This writeup is for an A20 engine but should be similar for the carbureted engine. Removal This procedure leaves the engine in situ and therefore I found the most difficult part to be lifting the gearbox back onto the clutch/engine. This is also based on using a FULL clutch k...

copied from outside CPC Complete document here. docs.google.com/document/d/10oLX9K1pRMNsLZJFz3fjpyXHrwXYGBdkBuXivl7XC48/edit?usp=sharing I spotted a thread in the 4th gen area with a similar question to my recent one about the speed sensor, and in the thread was this link.. http://honda-tech.com/zer...

Copied from outside CPC Little Write up i did for 3Geez guy's you might want to post it here cheers. Re: P & P Intake Manifold? Theres a magazine called practical performance car they did a excellent 5 issue spread on headwork if you can order it worth getting, if not any fo the reputable engine...

|3last Well i've had this JDM maplight for a while now, it came with a wiring harness. The harness was pretty beat up, but looks like factory. I've been under the dash multiple times looking for any type of fitting, or accessory place to put this fitting. Was Never able to find anything that fit. Th...

copied from outside CPC The full document with images in place can be found at this link. docs.google.com/document/d/16KwrH1PtXLCeDQTAa3qCYunHZ6uYT81neaZ-Wp14io8/edit?usp=sharing Ok gang. I decided to start a thread about what's needed, not needed, what can get pitched and what must stay as far as t...

copied from sources outside CPC KYB GR-2 Strut and 94-00 Integra Coilover install. Well first off you have to go and order your struts and coilovers. I used KYB GR-2 struts and a set of generic sleeved coilovers and springs for a 1994-2000 Integra. Once all my parts had arrived at the store I brough...

writeup copied and pasted from sources outside CPC. Try to find a Helms manual (not Haynes I have one and it sucks) or a Honda Service manual. The hardest part is getting of the bolt that holds on the crank pully, once you have that off the rest is cake, so I would suggest that you try that first be...

nice man. looks like it fits well and probly flies with the extra HP

1. Infamouz
2. katsumi_bb6
3.TypeSHindu
4. -Brewer-
5. 91prelude2se
6. bb1.be
7. Mr.bb6
8. Letty.the.lude
9. Timolude

Perfect i will be there as long as its not raining again

Its looking like full blown rain for saturday. Ill be away ln vacation the 3rd. What are people thinkkng about the weather? If it's going to rain a lot, the meet will be pushed to the following weekend. I can try and see if we can pushed it to another date if it doesn't work for a lot of people. Th...

Its looking like full blown rain for saturday. Ill be away ln vacation the 3rd. What are people thinkkng about the weather?

As long as the car is back from the shop i should be there!

There was/is a second gen in Halifax with an h22 swap. It was built by a local shop down there and required extensive subframe modification as well as custom axles brakes etc it is a huge undertaking and you definitely need to find someone with quality fabrication skills. You will definitely need to...

Definitely north. The roads and scenary are so awsome. I would love to try and do some kind of weekend event. Leave kn a sat morning, Have way points on a route and book a hotel at the far end then back the next day via ankther route. Everyone has to have backup parts like engine belts and spare tir...

Id be down for 2.of the top ones

Hello. The link below contains the information required to diagnose your headlight retractor system.
Basic knowledge of using a DMM and test procedures will be required.

https://photos.app.goo.gl/wtpXtqaosekPUPsE8

Thanks guys its been a labour of love. Once i get a few hours to set aside ill post Part 2: The Build! Thatll bring us right through last winter and last summer.

where to begin. the build is a bit over a year or so old now. on going as they do. ill try to cover the stage one in this post and then reply with each stage as it has gone along. pics will be plentiful and detailed. It all started in october of 2018, 5 years after the last time i drove my blue 85. ...

Rocking the hammer with my 2g. Can be spotted all over southern ontario at any given time lol
Cruises, im in!
Meets, im in!
Bored and going for wendys 3 towns away, im in!
Wrenching, in!
Basically if its lude related im probly going to say yes lol

So what is this thing they call a second gen prelude? Simply it is the best prelude 🤷‍♂️ in my opinion of course lol Its boxy and wedgy and everything 80s is meant to be. It had tons of cool toys to make it apealing to young men as a good car to pick up girls in. Its sporty and drives like a go cart...

Where to aquire said cards to distribute?